HomeHow to make good folds for Pepakura made armor - Borrowed from 405th
Page 1 of 1
How to make good folds for Pepakura made armor - Borrowed from 405th
DarkeSword Thu Jul 23, 2009 1:43 am
Pepakura Folding Tutorial
This is a tutorial on how to fold the lines on Pepakura correctly and clean.
1. The supplies for this folding method that you will need are:
- 2 pens (try using 2 different colors) (EX:Red and Black)
- 1 ruler (metal rulers work best for this)
2. First you must assign the pens to a certain fold. (remember you must keep them the same through out the process)
Example:
Red Pen = Valley fold lines
Black Pen = Mountain fold lines
->**NOTE: In some cases it is seen that a models valley fold and mountain fold line style is swapped to the opposite line style**
3. Cut out the piece you are going to be folding.
4. Set up the Ruler so it is parallel to the line you are going to score, make sure that it is a bit close, as seen here:
5. Then, your going to want to take the pen you assigned to valley fold or mountain fold and go over the line 3 or 4 times pressing semi hard with the ruler as a guide to keeping the pen straight and on the original line.
6. Once you have done that, you may fold the paper accordingly to come out as a nice clean fold.
VALLEY FOLD
MOUNTAIN FOLD
Pepakura Folding Tutorial Option #2
* This next folding technique requires the use of sharp utensil's so please be very careful upon doing this.( I am not responsible for any injury's that can occur! )
This next tutorial is for all you veteran folders out there who don't feel the need to use pens in order to fold your armor.
(So if you are a first time folder I suggest you look at the first tutorial of this topic to learn more.)
Alright then, some of the things your going to need for this procedure are:
-An X-acto Knife
-a couple of spare X-acto blades
-One metal ruler
-Something to work on that will not allow the pressure of scoring to bleed through onto a nice table/counter top.
1. First, cut out the piece that you will be scoring.
2. Next, Position the piece so that there is enough room to move your X-acto knife and arms freely.
3. Then, taking the Blunt sharp side of the X-acto knife, you'll need to gently make a small crease, using the ruler as a guide. Its your choice on whether or not to use the blunt or sharp side, but my advice is to use the blunt side, to ensure that you don't cut the flap off.
(DON'T PUSH TO HARD OR YOUR FLAP MAY COME OFF! *REMEMBER* YOU'RE NOT USING PENS ANYMORE, SO IT'S IMPORTANT TO REALIZE HOW MUCH PRESSURE YOU ARE PUTTING INTO YOUR SCORE.)
4. After you have done your score you may now fold your paper to its proper shape.
This is a tutorial on how to fold the lines on Pepakura correctly and clean.
1. The supplies for this folding method that you will need are:
- 2 pens (try using 2 different colors) (EX:Red and Black)
- 1 ruler (metal rulers work best for this)
2. First you must assign the pens to a certain fold. (remember you must keep them the same through out the process)
Example:
Red Pen = Valley fold lines
Black Pen = Mountain fold lines
->**NOTE: In some cases it is seen that a models valley fold and mountain fold line style is swapped to the opposite line style**
3. Cut out the piece you are going to be folding.
4. Set up the Ruler so it is parallel to the line you are going to score, make sure that it is a bit close, as seen here:
5. Then, your going to want to take the pen you assigned to valley fold or mountain fold and go over the line 3 or 4 times pressing semi hard with the ruler as a guide to keeping the pen straight and on the original line.
6. Once you have done that, you may fold the paper accordingly to come out as a nice clean fold.
VALLEY FOLD
MOUNTAIN FOLD
Pepakura Folding Tutorial Option #2
* This next folding technique requires the use of sharp utensil's so please be very careful upon doing this.( I am not responsible for any injury's that can occur! )
This next tutorial is for all you veteran folders out there who don't feel the need to use pens in order to fold your armor.
(So if you are a first time folder I suggest you look at the first tutorial of this topic to learn more.)
Alright then, some of the things your going to need for this procedure are:
-An X-acto Knife
-a couple of spare X-acto blades
-One metal ruler
-Something to work on that will not allow the pressure of scoring to bleed through onto a nice table/counter top.
1. First, cut out the piece that you will be scoring.
2. Next, Position the piece so that there is enough room to move your X-acto knife and arms freely.
3. Then, taking the Blunt sharp side of the X-acto knife, you'll need to gently make a small crease, using the ruler as a guide. Its your choice on whether or not to use the blunt or sharp side, but my advice is to use the blunt side, to ensure that you don't cut the flap off.
(DON'T PUSH TO HARD OR YOUR FLAP MAY COME OFF! *REMEMBER* YOU'RE NOT USING PENS ANYMORE, SO IT'S IMPORTANT TO REALIZE HOW MUCH PRESSURE YOU ARE PUTTING INTO YOUR SCORE.)
4. After you have done your score you may now fold your paper to its proper shape.
DarkeSword- Staff
- Posts : 18
Join date : 2009-07-22
Age : 33
Location : FFX Station, VA
Similar topics» How to use pepakura to make your armor - The newest armor files, some steps can be skipped, so keep a keen eye out
» Ultimate Pepakura FAQ - Borrowed from the 405th
» Pepakura Building for Dummies - Borrowed from 405th
» Pepakura Fiberglass and Smoothing Tutorial - Borrowed from the 405th
» Muddy Secrets Tutorial - Borrowed from 405th
» Ultimate Pepakura FAQ - Borrowed from the 405th
» Pepakura Building for Dummies - Borrowed from 405th
» Pepakura Fiberglass and Smoothing Tutorial - Borrowed from the 405th
» Muddy Secrets Tutorial - Borrowed from 405th
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|